![Vault Board Recovery Kit: Stratum Vault Board Recovery Kit: Stratum](https://cdn11.bigcommerce.com/s-ods7on1uof/images/stencil/500x500/products/1284/2889/VRKStratum%2520detail__36094.1710940330.jpg?c=1)
Share:
![](https://cdn11.bigcommerce.com/s-ods7on1uof/images/stencil/100x111/products/1346/2961/VaultBoardWasherKit%2520detail__81574.1710940330.jpg?c=1)
Vault Board Washer Kit
$17.00
- First you will need to remove the cover and foam from the top
- Remove the spring and rubber bumper
- Drill out the hole with a 3/8 drill bit
- Install the t-nut on the top side by inserting into the hole and tapping with a hammer until seated
- Next install the fender washer, 3 flat washers and the button head bolt and tighten
- Re-install the spring and repeat until all the bumpers have been replaced
- Instructions:
- Download PDF